Powernex Precision Technology> Industrial Power Distribution Component-
Din Rail Terminal Blocks
Single Layer DIN Rail terminal blocks DPT Selection Guide
Double Layer DIN Rail terminal blocks DPTTB Selection Guide
Mounting Accessories of DPT series Selection Guide
Space-saving design / Front connection
Vibration-proof anti-loosening wire connection with pre-stressed spring clamp
Easy to operate, fast wiring installation with top wire entry
Corrosion-proof terminal points
Easy mounting and dismounting from the terminal rail
Low contact resistance
Easy for the extension of terminal connection
Easy handling and safe connection
Connecting without tools is easy and time-saving
Colored platens ensure safety connections and operations
Din Rail T35 Zinc Plated Steel
Din Rail T35 Zinc Plated Steel Selection Guide
TS35mm DIN rail is widely used as a standard bracket, which can quickly mounted the rail type terminal blocks, power supplies, circuit breakers, fuse holders, relays and industrial control components in control cabinets and distribution boxes.
Unique appearance design with environmental-friendly zinc plating and corrosion-resistant
SPCC steel material that prevent distortion
Precision by stamping process, no sharp edges for hand injury
Terminal Block Cover
Inductive Proximity Sensor
Inductive Proximity Sensor Metal Casing Rectangular Series Selection Guide
Inductive Proximity Sensor Tubular Anti-Bending Series Selection Guide
Sensing in a non-contact manner, which will not wear out or damage the detection object.
Product life is longer.
It is suitable to use even there is oil, dirt or water on the detecting object.
Response speed is faster.
Not affected by the surface color of the detected object.
Emergency Switch Selection Guide
Push Switch Selection Guide
Key Selector Switch Selection Guide
Metal Switch Selection Guide
Limit Switch Selection Guide
Buzzer Selection Guide
Pilot Light Selection Guide
Solid housing design for operator and contact block to reduce installation space
Complete type with 16mm & 22mm version
IP66 protection rating
With anti-rotation latch design on the operator
Tighten or disassemble the fixing nut by hand tools or finger freely
PUSH-IN quick wiring design
Double wiring holes design, capable of solid wire, strand wire and European terminal wiring
New partition and spring structure design, increase the wire holding force and stability
The contact blocks and lamp holders are distinguished by color which is clearly recognizable
Waterproof Silicon Sleeve: Provides IP66 protection for the contact under the mounting panel
Waterproof connector for LED drivers
Fuse WJ30-4+WJ30-H Spec
WJ30 series , used in Solar、 Industrial 、Equipment and so on Applications for over-current protection
WJ30H series , Fuse Holder for PV Fuses
Agency ratings up to 1500Vdc for use with solar PV fuses
Designed to UL 4248-19
Powernex Precision Technology> Wire/Cable-
AC Power Cord
USB 3.1 GEN2 Type C
Powernex Precision Technology> Distribution Box-
Distribution Box Selection Guide
Continuously welded seams Foam-in-place seamless gasket 120-degree opening heavy-duty industrial hinges
RAL 7035 outdoor powder coating
Gland plate on bottom
Right hand opening; door interchangeable
Custom cutouts available
Powernex Precision Technology> 19 Rack Cabinet-
RA Series 19 Rack Cabinet
RA Series 19 Rack Cabinet Selection Guide
Rack Accessories Selection GuideRA Series Features:
The surface coated with electrostatic powder, which is dust-proof, anti-oxidation, not easy to scratch, and resistant to acid and alkali.
There are no screw parts on the side panels of the cabinet, so as the upper and lower frames; keeps the overall appearance clean.
In order to increase the wiring space, the front width of the cabinet is increased to 600mm while the internal remains a standardized frame of 19 inches.
Three 4-inch module fans can be installed on the top of the cabinet (Optional modules of 110V/220V for purchase & self-assemble)
Equipped with braked wheels and leveling screws to maintain the balance of the cabinet and prevent it from shaking.
Powernex Precision Technology> Accessory - Mounting Accessories
Power Schottky Rectififier
DC Changeable Plug
DC Changeable Plug P1J Selection Guide
DC Changeable Plug P1M Selection Guide
DC Changeable Plug R7BF Selection Guide
Flexible solution for small quantity
Easy modification for different size of DC plug
Off-the-shelf and no MOQ
Suitable for GST18~16, GSM06~60, GEM06~60, GE12~40, SGA12~60, GS06/15, OWA-60U/E, GST90~120, GSM90, GST120~220, GSM120~220, OWA-90U~200U